Order Products : sales@su-jiao.com
Andur 70 DP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6hKgOB_Andur-70-DP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 70-DP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 70 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 1060 | cP | ASTM D2393 |
| 100°C | 270 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 8.8 to 9.2%Specific Gravity, ASTM D792, 77°F: 1.1 g/mlSpecific Gravity, ASTM D792, 212°F: 1.06 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nylene® APT 2401 HSSP | Custom Resins Group | Nylon 66 | Nylene® |
| FERREX® GPP10CS71BK | Ferro Corporation | PP, Unspecified | FERREX® |
| EMAC® SP2220 | Westlake Chemical Corporation | EMA | EMAC® |
| LUVOCOM® 1105-8746 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| Plaslube® PA6/6 GF/M40 ML2 GY | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
