Order Products : sales@su-jiao.com
Braskem PE F-2022/0
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6gfeIK_Braskem-PE-F-2022-0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Excellent sealing characteristics and optical properties with well balanced mechanical properties. Application General purpose which require no additives; shrink films for goods; flat film for diapers and injection blow molding. Recommended film thickness: 0.025-0.100mm. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.922 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Broken, 30 µm, blown film | 40.0 | MPa | ASTM D882 |
| TD : Broken, 30 µm, blown film | 20.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Broken, 30 µm, blown film | 230 | % | ASTM D882 |
| TD : Broken, 30 µm, blown film | 900 | % | ASTM D882 |
| Dart Drop Impact (30 µm, Blown Film) | 70 | g | ASTM D1709A |
| Elmendorf Tear Strength - TD (30 µm, Blown Film) | 90 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 30.0 µm, Blown Film) | 93 | ASTM D2457 | |
| Haze (30.0 µm, Blown Film) | 8.0 | % | ASTM D1003 |
| Additional Information |
|---|
| Film properties taken from 25µm film produced on a 40 mm extruder with BUR=2.2:1 |
| Extrusion instructions |
|---|
| Blow Film Extrusion Temperature profile: 120 to 170°C. Blow up ratio: 1.8 to 3.0:1 Blow Molding Temperature profile: 180 to 310°C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® HDP 510 | Marco Polo International, Inc. | HDPE | MARPOL® |
| POLYNIL® P120 | Nilit Plastics | Nylon 66 | POLYNIL® |
| Hetron™ 197 | Ashland Performance Materials | Polyester, TS | Hetron™ |
| Latistat 45/7-02 | LATI S.p.A. | HDPE | Latistat |
| Sylvin 8940-60 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
