Order Products : sales@su-jiao.com
SABIC® LDPE 1905U0
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6gaPRy_SABIC-LDPE-1905U0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LDPE 1905U0 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 1905U0 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 44 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 240 | MPa | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 88.0 | °C | ISO 306/A |
| Melting Temperature (DSC) | 105 | °C | DIN 53765 |
| Peak Crystallization Temperature (DSC) | 94.0 | °C | DIN 53765 |
| Heat of Fusion | 100 | J/g | DIN 53765 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nipol® DN401LL | Zeon Chemicals L.P. | NBR | Nipol® |
| KOPLA PP KPG1090 | KOPLA Co., Ltd. | PP, Unspecified | KOPLA PP |
| Lytex 4129 | Quantum Composites Inc. | Epoxy | Lytex |
| Optix® CP-927 | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
| Hostacom ERC 161Y | LyondellBasell Industries | PP Copolymer | Hostacom |
