Order Products : sales@su-jiao.com

Eltex® MED PH23H630

Category:	LDPE , Low Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex® MED
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6fn2Aa_Eltex-MED-PH23H630.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Low Density Polyethylene for Pharmaceutical Blow-Fill-Seal Eltex® MED PH23H630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH23H630 is produced according to good manufacturing practice and is additive-free. Eltex® MED PH23H630 is available in granular form. Eltex® MED PH23H630 can be used in "blow-fill and seal" machines for the production of ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as blow moulding or injection moulding. The product is not intended for heat sterilization.

Message

Low Density Polyethylene for Pharmaceutical Blow-Fill-Seal

Eltex® MED PH23H630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products.

Eltex® MED PH23H630 is produced according to good manufacturing practice and is additive-free.
Eltex® MED PH23H630 is available in granular form.

Eltex® MED PH23H630 can be used in "blow-fill and seal" machines for the production of ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as blow moulding or injection moulding. The product is not intended for heat sterilization.

General Information
Features	Additive Free Good Flexibility Soft
Uses	Bottles Pharmaceutical Packaging Pharmaceuticals Pouches - Flexible Packaging
Agency Ratings	EP Monograph 3.1.4 USP Class VI
RoHS Compliance	Contact Manufacturer
Forms	Granules
Processing Method	Blow Molding Extrusion Blow Molding Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.923	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	50		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	11.0	MPa	ISO 527-2/50

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	50.0	°C	ISO 75-2/B

Extrusion	Nominal Value	Unit
Melt Temperature	165 to 190	°C

Resin Grade	Manufacturer	Category	Trademark
TOTAL Polyethylene HDPE HL 428	TOTAL Refining & Chemicals	HDPE, MMW	TOTAL Polyethylene
Andur 8 APFLM	Anderson Development Company	PUR-Ester/TDI	Andur
Galloo GP-PP-840	Galloo Plastics	PP, Unspecified	Galloo
Hostalen PP H2222 36	LyondellBasell Industries	PP Impact Copolymer	Hostalen PP
Lucent PP TPP-240	Lucent Polymers, Inc.	PP, Unspecified	Lucent PP