Order Products : sales@su-jiao.com
Soarnol® D2908
| Category: | EVOH , Ethylene Vinyl Alcohol |
| Manufacturer: | Soarus L.L.C. |
| Trademark: | Soarnol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6ee5bB_Soarnol-D2908.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Soarnol D2908 is a 29 mol% ethylene content standard grade of Soarnol with an intermediate melt flow rate. Soarnol D2908 has excellent gas barrier property at low humidity and is primarily used in coextruded sheet and coextrusion coating applications. This resin can also be used in coextruded film and coextruded blow-molded containers. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 8.0 | g/10 min | |
| Ethylene Content | 29.0 | wt% | Internal method |
| Volatile Matter | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Permeability 1(20°C, 20 µm) | 0.400 | cm³/m²/24 hr | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 62.0 | °C | DSC |
| Melting Temperature | 188 | °C | DSC |
| Peak Crystallization Temperature (DSC) | 163 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 | °C | |
| Cylinder Zone 2 Temp. | 200 | °C | |
| Cylinder Zone 3 Temp. | 220 | °C | |
| Cylinder Zone 4 Temp. | 230 | °C | |
| Cylinder Zone 5 Temp. | 230 | °C | |
| Adapter Temperature | 230 | °C |
| Extrusion instructions |
|---|
| Extruder: 40 mm Single screw extruder, L/D = 28Screw: Full-flighted, constant pitch type, CR = 3.5Screen pack: 80/120/50 meshDie: Manifold type, die width = 450 mm, lip clearance = 0.2 mm |
| Note Message | |
|---|---|
| 1 . | Measured with OXTRAN 10/50 (MOCON), 65%RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBB106LE | Teknor Apex Asia Pacific PTE. LTD. | PE, Unspecified | Sinpolene |
| Zytel® RS LC3060 NC010 | DuPont Performance Polymers | Nylon 610 | Zytel® RS |
| CP PRYME® Polyethylene PE100HDH-8M | Chase Plastics Services Inc. | HDPE | CP PRYME® Polyethylene |
| Elastollan® Soft 45 AP | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| KOPELEN JM-365 | Lotte Chemical Corporation | PP Impact Copolymer | KOPELEN |
