Order Products : sales@su-jiao.com

NuSil CF5-3521-2

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6eGt9X_NuSil-CF5-3521-2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Liquid Silicone Rubber Comment: Liquid Injection Molding, Fuel Resistance

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Liquid Silicone Rubber

Comment: Liquid Injection Molding, Fuel Resistance

General Information
Features	Electrically Conductive Fuel Resistant
Uses	Aircraft Applications Electrical/Electronic Applications
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Black
Density	1.30	g/cm³
Viscosity	240	Pa·s
Curing Time (23°C)	48	hr
Pot Life	210	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	30
Tensile Strength	3.79	MPa
Tensile Elongation at Break	280	%
Tear Strength	6.13	kN/m

Resin Grade	Manufacturer	Category	Trademark
Sindustris PC HI5003A	Sincerity Australia Pty Ltd.	PC	Sindustris PC
VICTREX® PAEK WG™ 102	Victrex plc	PAEK	VICTREX® PAEK
EPO-TEK® OD2003	Epoxy Technology Inc.	Epoxy	EPO-TEK®
INEOS HDPE G60-25-144	INEOS Olefins & Polymers USA	HDPE	INEOS HDPE
Optix® CA-75 UVA	Plaskolite, Inc.	Acrylic (PMMA)	Optix®