Order Products : sales@su-jiao.com
RELENE® HD53TA010
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6dMhgf_RELENEHD53TA010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HD53TA010 is a High Density Polyethylene (HDPE) grade produced and specially formulated to manufacture stretched tape products such as Tarpaulins and Wrapping fabrics and other extrusion products with good combination of tenacity and elongation. It has very good processability, low water carry - over and stretchability, less motor load and high output combined with good tape properties to make it a grade of choice. This material is particularly suitable for making low denier tapes |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.2 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 22.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 15 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 800 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecnoflon® FOR 7352 | Solvay Specialty Polymers | Fluorelastomer | Tecnoflon® |
| SynPlast™ TOTM-E | PolyOne Corporation | Tri (2-ethylhexyl) Trimellitate | SynPlast™ |
| Desmopan® 3385A | Covestro - PUR | TPU-Polyester | Desmopan® |
| Hapweld™ 1384 | Hapco Inc. | TP, Unspecified | Hapweld™ |
| SABIC® PP PCGR40L | Saudi Basic Industries Corporation (SABIC) | PP Random Copolymer | SABIC® PP |
