Order Products : sales@su-jiao.com
ASTAMID™ MB3SW
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | ASTAMID™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6dKxGe_ASTAMID-MB3SW.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ASTAMID™ MB3SW is an easy flow, heat and UV stabilized injection moulding grade of PA6 designed for fast processing. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.13 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.5 | -- | % | ASTM D955 |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 9.5 | -- | % | |
| Equilibrium, 23°C, 50% RH | 3.1 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus 1(3.20 mm) | 3400 | 1150 | MPa | ASTM D638 |
| Tensile Strength 2(3.20 mm) | 85.0 | 45.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 3.20 mm) | 4.5 | 25 | % | ASTM D638 |
| Flexural Modulus 4(3.20 mm) | 2950 | 1000 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength 5 | 4.0 | -- | kJ/m² | ISO 179 |
| Notched Izod Impact (3.20 mm) | 45 J/m | No Break | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed, 3.20 mm | 185 | -- | °C | |
| 1.8 MPa, Unannealed, 3.20 mm | 66.0 | -- | °C | |
| CLTE - Flow | 8.5E-5 | -- | cm/cm/°C | ASTM D696 |
| Flammability | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | HB | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 to 85.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 220 to 240 | °C | |
| Middle Temperature | 230 to 250 | °C | |
| Front Temperature | 240 to 260 | °C | |
| Processing (Melt) Temp | 250 to 280 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C | |
| Injection Pressure | 60.0 to 140 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.100 to 0.500 | MPa | |
| Screw Speed | 40 to 60 | rpm | |
| Clamp Tonnage | 5.0 to 9.0 | kN/cm² |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 987 | RTP Company | PSU | RTP |
| AIE PA66 6010F | Asia International Enterprise (Hong Kong) Limited | Nylon 66 | AIE PA66 |
| CALP 4600G | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| Edgetek™ AM-35GF/000 FR NH | PolyOne Corporation | PPA | Edgetek™ |
| Hapweld™ 37 | Hapco Inc. | TP, Unspecified | Hapweld™ |
