Order Products : sales@su-jiao.com
ESENTTIA 16C12NA
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6aQmbr_ESENTTIA-16C12NA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: Impact block copolymer polypropylene with good impact/stiffness balance and tough weld line. Recommended for: Injection molding of rigid containers as pails, buckets, housewares and industrial applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 16 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 21.7 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 6.5 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1100 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 530 | J/m | ASTM D256A |
| Gardner Impact 5(-30°C, 3.20 mm, Injection Molded) | 31.6 | J | ASTM D5420 |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| 5 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4995 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Maxxam™ 34-1520 UV SSM TFPP | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| Siveras™ LX70U30 | Toray Resin Company | LCP | Siveras™ |
| Wellamid® XT1863-BK1 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| New-prene™ 6175B | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
