Order Products : sales@su-jiao.com
TECHNYL® C 246SI V30 BLACK 31N
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Solvay Engineering Plastics |
| Trademark: | TECHNYL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6a7sgF_TECHNYLC246SIV30BLACK31N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TECHNYL® C 246SI V30 Black is a polyamide 6 reinforced with 30% of glass fiber, with improved impact resistance, for injection moulding. This grade offers high impact strength and good mechanical properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.32 | -- | g/cm³ | ISO 1183/A |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 0.88 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 2.0 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 8600 | 5000 | MPa | ISO 527-2/1A |
| Tensile Stress (Break, 23°C) | 140 | 90.0 | MPa | ISO 527-2/1A |
| Tensile Strain (Break, 23°C) | 4.0 | 10 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 7500 | 4400 | MPa | ISO 178 |
| Flexural Stress (23°C) | 230 | 125 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 12 | -- | kJ/m² | ISO 179/1eA |
| 23°C | 20 | 30 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ||||
| -30°C | 95 | 100 | kJ/m² | ISO 179/1eU |
| -30°C | 80 | -- | kJ/m² | ISO 179/1fU |
| 23°C | 90 | 110 | kJ/m² | ISO 179/1eU |
| 23°C | 80 | 100 | kJ/m² | ISO 179/1fU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 200 | -- | °C | ISO 75-2/Af |
| Melting Temperature | 222 | -- | °C | ISO 11357-3 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Suggested Max Moisture | 0.080 | % | |
| Rear Temperature | 250 - 270 | °C | |
| Middle Temperature | 260 - 280 | °C | |
| Front Temperature | 260 - 290 | °C | |
| Mold Temperature | 70 - 90 | °C |
| Injection instructions |
|---|
| The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nipol® NS616 | Zeon Chemicals L.P. | NBR | Nipol® |
| Aquivion® D79-25BS | Solvay Specialty Polymers | PFSA | Aquivion® |
| Formolene® 3355E | Formosa Plastics Corporation, U.S.A. | PP Random Copolymer | Formolene® |
| GELOY™ EXGY0058 resin | SABIC Innovative Plastics | ASA+PC | GELOY™ |
| Lusin® Clean G 315 | Chem-Trend L.P. | Unspecified | Lusin® |
