Order Products : sales@su-jiao.com
Generic PP, Unspecified - Carbon Fiber
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6VbXR3_Generic-PP-Unspecified---Carbon-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP, Unspecified - Carbon Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 - 1.10 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.24 - 0.36 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 29.0 - 43.0 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2760 - 12400 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 61.7 - 66.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 25 - 59 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 130 - 370 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 2.0 - 5.0E+6 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.6 - 82.5 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 199 - 200 | °C | |
| Middle Temperature | 219 - 221 | °C | |
| Front Temperature | 243 - 244 | °C | |
| Processing (Melt) Temp | 209 - 238 | °C | |
| Mold Temperature | 37.8 - 49.0 | °C | |
| Back Pressure | 0.258 - 0.620 | MPa | |
| Screw Speed | 45 - 55 | rpm |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PP, Unspecified - Carbon FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARCOBLEND MBD1000 NC01 | POLY GIN | PC+ABS | MARCOBLEND |
| LEXAN™ 955U resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
| Karina WHITE PVC COMPOUND -E 854-10/150-ERYB | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Pebax® Rnew 40R53 SP 01 | Arkema | PEBA-Ether | Pebax® Rnew |
| LNP™ LUBRICOMP™ RN001S compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
