Order Products : sales@su-jiao.com
AMTOPP HCD18
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Inteplast Group |
| Trademark: | AMTOPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6VLMhe_AMTOPP-HCD18.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Matte Finished, Non-Slip BIAXIALLY ORIENTED POLYPROPYLENE FILM NON HEAT-SEALABLE |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Dimensional Stability 1 | |||
| Across Flow, 130°C | < 3.0 | % | |
| Flow, 130°C | < 5.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Static) | > 0.60 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 18 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 138 | MPa | |
| TD : Yield | 248 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 140 | % | |
| TD : Break | 60 | % | |
| Yield 2 | 61.7 | m²/kg |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Energy 3 | 40 | dyne/cm | ASTM D2578 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 16 | ASTM D2457 | |
| Haze | 55 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | 5 minutes |
| 2 . | Internal Method |
| 3 . | High Energy Flame Side |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA610 Type III | Shandong Guangyin New Materials Co., Ltd. | Nylon 610 | Shandong PA610 |
| Silplus® 40 MP | Momentive Performance Materials Inc. | Silicone Rubber, HTV | Silplus® |
| WPP PP PPC3GF1.5-Natural | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| Dialon 1015 | DTR S.r.l. (Develop Thermoplastic Resins) | PC | Dialon |
| omay® SB11 | Suzhou OMAY Optical Materials Co., Ltd | Film, PC | omay® |
