Hyflon® PFA 125X Datasheet,PFA,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat resistance, inherent flame resistance, low surface energy, and exceptional dielectric properties. Hyflon® PFA resins have been designed to retain their properties over a wide range of temperatures from cryogenic to 300°C (572°F) and are the material of choice in applications such as linings in the Chemical Process Industry, Oil and Gas, Specialty Cables, Semiconductor Industry, Aerospace, and other challenging industries. Hyflon® PFA 125X is a low melt flow rate resin designed for pipe extrusion, where very high viscosity and melt strength are needed. It also has significantly lower permeability to gasses than standard PFAs. Hyflon® PFA P125X is an ASTM D3307 - Type XV resin.

General Information
Features	Semicrystallization Low liquidity Heat resistance, high Flame retardancy
Uses	Semiconductor molding compound Lining Cable sheath Piping system Pipe fittings Aerospace applications Oil/Gas Supplies
Agency Ratings	ASTM D 3307 Type XV
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)	1.5 - 3.0	g/10 min	ASTM D1238
1% weight loss (TGA)	1.2E-4 - 2.0E-4	cm/cm/°C	ASTM D696
Density	2.120 - 2.170	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Hardness - Shore D	55.0 - 65.0		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus ¹(280°C)	49.0	MPa	ASTM D1708

Impact	Nominal Value	Unit	Test Method
Notched impact strength of simply supported beams- (23°C)	no break		ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat of crystallization	28.0 - 38.0	J/g	ASTM D4591
Heat of Fusion	28.0 - 38.0	J/g	ASTM D4591

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus ²(23°C)	450 - 650	MPa	ASTM D1708
Tensile Strength (Break, 23°C)	> 25.0	MPa	ASTM D1708
Tensile Elongation (Break, 23°C)	> 300	%	ASTM D1708

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	310 - 316	°C	ASTM D4591
Peak Crystallization Temperature (DSC)	285 - 295	°C	ASTM D4591
Thermal Conductivity (40°C)	0.15 - 0.25	W/m/K	ASTM C177

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	95	%	ASTM D2863

Additional Information
PROCESSINGBecause PFA is corrosive in the melt, machinery used to process Hyflon® should be lined with corrosion resistant alloys.HEALTH SAFETY AND ENVIRONMENTHyflon® PFA 125X is a very inert polymer and it is not harmful if used and handled according to standard processing procedures.If handled inappropriately, it may release harmful toxic chemicals. Please refer to the Material Safety Data Sheets for more information on handling and safety.PACKAGING AND STORAGEHyflon® PFA 125X resin is available in 25 kg (55 lbs) and 600 kg (1323 lbs) packaging. Though it has an indefinite shelf life, it is recommended to store it in a clean area, protected from direct sunlight, and possible contamination.

Additional Information

PROCESSINGBecause PFA is corrosive in the melt, machinery used to process Hyflon® should be lined with corrosion resistant alloys.HEALTH SAFETY AND ENVIRONMENTHyflon® PFA 125X is a very inert polymer and it is not harmful if used and handled according to standard processing procedures.If handled inappropriately, it may release harmful toxic chemicals. Please refer to the Material Safety Data Sheets for more information on handling and safety.PACKAGING AND STORAGEHyflon® PFA 125X resin is available in 25 kg (55 lbs) and 600 kg (1323 lbs) packaging. Though it has an indefinite shelf life, it is recommended to store it in a clean area, protected from direct sunlight, and possible contamination.

Note Message
1 .	1mm/min
2 .	1.0 mm/min

Category:	PFA , Perfluoroalkoxy
Manufacturer:	Solvay Specialty Polymers
Trademark:	Hyflon® PFA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6TpBSZ_HyflonPFA125X.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Xuchuan 6002/B-8006N (Mid-sole)	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
Ebalta BIV 800 / BIV 60-1	Ebalta Kunststoff GmbH	Epoxy	Ebalta
LAPEROS® GA130	Polyplastics Co., Ltd.	LCP	LAPEROS®
Laser+® HP806 (B93A)	DAK Americas LLC	PET	Laser+®
SHINSTRA WG40TKB	Shinil Chemical Industry Co., Ltd.	Nylon 66	SHINSTRA