Order Products : sales@su-jiao.com

TRIREX® 3025FD

Category:	PC , Polycarbonate
Manufacturer:	Samyang Corporation
Trademark:	TRIREX®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6TY3KV_TRIREX3025FD.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries.

Agency Ratings : USP Class VI

TRIREX 3025FD is a polycarbonate resin grade which has high impact strength in combination with superior mechanical and physical property.

APPLICATIONS

TRIREX 3025FD resin grade is used for Medical devices, food contact materials and etc.

Medium viscosity. Transparent colors only.

General Information
Features	Good dimensional stability Low hygroscopicity Impact resistance, high Good electrical performance Good liquidity Low temperature impact resistance Good weather resistance Compliance of Food Exposure Medium viscosity
Uses	Electrical/Electronic Applications Electrical appliances Non-specific food applications Optical applications Application in Automobile Field Medical devices
Agency Ratings	USP Class VI
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.20	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)	10	g/10 min	ASTM D1238
Molding Shrinkage - Flow (3.00 mm)	0.50 - 0.70	%	ASTM D955
Water Absorption (23°C, 24 hr)	0.15	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	69.6	MPa	ASTM D638
Tensile Elongation (Break)	120	%	ASTM D638
Flexural Modulus	2060	MPa	ASTM D790
Flexural Strength (Yield)	86.3	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.18 mm)	880	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	135	°C	ASTM D648
CLTE - Flow	5.0E-5 - 7.0E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	4.0E+16	ohms·cm	ASTM D257
Dielectric Strength	30	kV/mm	ASTM D149
Arc Resistance	120	sec	ASTM D495

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.6 mm)	V-2		UL 94

Injection	Nominal Value	Unit
Drying Temperature	120	°C
Drying Time	3.0 - 5.0	hr
Suggested Max Moisture	0.020	%
Rear Temperature	245 - 270	°C
Middle Temperature	260 - 285	°C
Front Temperature	275 - 300	°C
Nozzle Temperature	275 - 310	°C
Processing (Melt) Temp	275 - 310	°C
Mold Temperature	65 - 105	°C
Back Pressure	0.250 - 0.700	MPa
Screw Speed	40 - 70	rpm
Vent Depth	0.020 - 0.080	mm

Resin Grade	Manufacturer	Category	Trademark
Reslen PPH 50GF	Polimarky Spolka Jawna	PP Homopolymer	Reslen
TPUCO® TPUE-EH80	Taiwan PU Corporation	TPU-Polyether	TPUCO®
ALTECH® ASA A 1000/128 UV	ALBIS PLASTIC GmbH	ASA	ALTECH® ASA
Fibremod™ GB307HP	Borealis AG	TPO	Fibremod™
Hanwha Total PE R906P	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	HDPE	Hanwha Total PE