| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6TSK1S_Generic-Fluorelastomer.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Fluorelastomer This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.79 to 1.90 | g/cm³ | ASTM D792 |
| Apparent Density | 1.82 | g/cm³ | ASTM D1895 |
| Mooney Viscosity | 20 to 90 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 65 to 92 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 23°C) | 1.77 to 7.77 | MPa | ASTM D412 |
| Tensile Strength | ASTM D412 | ||
| Yield, 23°C | 11.9 to 15.0 | MPa | |
| Break, 23°C | 6.89 to 24.7 | MPa | |
| 23°C | 10.0 to 15.6 | MPa | |
| Tensile Elongation (Break, 23°C) | 170 to 330 | % | ASTM D412 |
| Tear Strength (23°C) | 19.6 to 24.7 | kN/m | ASTM D624 |
| Compression Set | 4.0 to 31 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -26.0 to -17.0 | °C | ASTM D746 |
| Melting Temperature | 120 to 222 | °C |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Demold Time | 10 to 1400 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO MUH E1500 | Techno Polymer Co, Ltd. | ABS | TECHNO MUH |
| NILENE® E10 K30T | Taro Plast S.p.A. | PP Copolymer | NILENE® |
| Cawiton® MT930 | Wittenburg B.V. | SEBS | Cawiton® |
| Durolon® IR2200 CR010 | Unigel Plásticos | PC | Durolon® |
| NORYL™ GFN3F resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |