Order Products : sales@su-jiao.com
Generic Nylon 66+Nylon 6I/6T - Glass Fiber
| Category: | Nylon 66+Nylon 6I/6T , Polyamide 66 + PA 6I/6T |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6RL0oT_Generic-Nylon-66-Nylon-6I-6T---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 66+Nylon 6I/6T - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.38 to 1.72 | g/cm³ | ISO 1183 |
| Molding Shrinkage (23°C) | 0.10 to 0.60 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 10500 to 21100 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 210 to 275 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 2.5 to 3.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 9300 to 20000 | MPa | ISO 178 |
| Flexural Stress (23°C) | 265 to 405 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 11 to 17 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 80 to 110 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 245 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 215 to 225 | °C | ISO 75-2/A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6 7630 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| NYCOA Polyamide 567 | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| Fibremod™ GB366WG | Borealis AG | TPO | Fibremod™ |
| LUVOCOM® 80-8588/L | LEHVOSS Group | Acetal (POM) Copolymer | LUVOCOM® |
| ULTEM™ 1010M resin | SABIC Innovative Plastics | PEI | ULTEM™ |
