Order Products : sales@su-jiao.com
NOVALAST® D41
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | NOVA Polymers, Inc. |
| Trademark: | NOVALAST® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6P7ZKh_NOVALAST-D41.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NOVALAST® D41 is a Thermoplastic Vulcanizate (TPV) material. It is available in North America for blow molding, extrusion, or injection molding. Primary attribute of NOVALAST® D41: Chemical Resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.964 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 12.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 540 | % | ASTM D412 |
| Tear Strength 1 | 71.3 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 25°C, 22 hr | 38 | % | |
| 70°C, 22 hr | 55 | % | |
| 100°C, 22 hr | 65 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -40.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™ 3010 | Asahi Kasei Chemicals Corporation | Acetal (POM) Homopolymer | Tenac™ |
| NEXT SIGNATURE PBT MG-100 | NEXT Specialty Resins, Inc. | PBT | NEXT SIGNATURE |
| AMC 2240 | Quantum Composites Inc. | Phenolic | AMC |
| Hangzhou Jinxin VMBOPP Film | Hangzhou Jinxin Filming Packaging Co., Ltd. | Film, BOPP | Hangzhou Jinxin |
| Lucet® N127-LD | LG Chem Ltd. | Acetal (POM) Copolymer | Lucet® |
