Order Products : sales@su-jiao.com
UBE Polyethylene F522N
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6OYEYb_UBE-Polyethylene-F522N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBE Polyethylene F522N is a Polyethylene material. It is available in North America. Primary attribute of UBE Polyethylene F522N: Good Processability. Typical application of UBE Polyethylene F522N: Packaging |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 14.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 550 | % | ASTM D638 |
| Apparent Bending Modulus | 150 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A RV300 100 NAT | Radici Plastics | Nylon 66 | Radilon® |
| Purell GB7250 | LyondellBasell Industries | HDPE | Purell |
| APEX® 90-P513A-85-NT | Teknor Apex Company | PVC+PUR | APEX® |
| Monprene® OM-12341 XRD1 (Preliminary Data) | Teknor Apex Company | TPE | Monprene® |
| SQUARE® LSR1929-50AH/BH | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
