Order Products : sales@su-jiao.com

Osterlene® HD1851

Category:	HDPE , High Density Polyethylene
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6MyZAw_OsterleneHD1851.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

HD1851 is an injection molding resin that has good processability and ESCR.

Applications for HD1851 include toys, containers and housewares.

HD1851 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

General Information
Uses	Household goods Container Toys
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.951	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	18	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, F50)	< 10.0	hr	ASTM D1693A

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	62		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	23.4	MPa	ASTM D638
Tensile Elongation ²(Break)	530	%	ASTM D638
Flexural Modulus	1000	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	120	°C	ASTM D1525

Note Message
1 .	50 mm/min
2 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
SCHULAMID® 66 GF 35 FC4	A. Schulman Europe	Nylon 66	SCHULAMID®
DOW™ LDPE 640S	The Dow Chemical Company	LDPE	DOW™ LDPE
BP RPP 3012 C NAT	Buckeye Polymers, Inc.	PP, Unspecified	BP
Flontech® FT-GR10-6	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
Elastron® D D400.D62.B	Elastron USA, Inc.	SBS	Elastron® D