Order Products : sales@su-jiao.com
Axiall PVC 3152
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Axiall Corporation |
| Trademark: | Axiall PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6MPVKh_Axiall-PVC-3152.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Georgia Gulf 3152 is a twin screw powder blend NSF Standard 14 & 16 approved for the extrusion of potable water and drain waste and vent pipe applicaiton. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 12454B | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 81 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2780 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 49.0 | MPa | ASTM D638 |
| Flexural Modulus | 2580 | MPa | ASTM D790 |
| Flexural Strength | 77.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 37 | J/m | ASTM D256 |
| Tensile Impact Strength | 170 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 70.0 | °C | ASTM D648 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 199 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® TCD PA66 5040 14015 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® TCD PA66 |
| Borealis PP KSR4525 | Borealis AG | PP, Unspecified | Borealis PP |
| HANWHA CTBA-8740BK | Hanwha Chemical | Polyolefin, Unspecified | HANWHA |
| Hostaform® XGC15-LW01 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Plaslube® PA6/6 GF/M40 ML2 GY | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
