Order Products : sales@su-jiao.com
Multi-Flex® TPE TES 2403 SI1 BLK - PL23095
| Category: | TES , Styrenic Thermoplastic Elastomer |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | Multi-Flex® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6KvPhl_Multi-Flex-TPE-TES-2403-SI1-BLK---PL23095.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyether block amide PEBAX® 2533 SA 01 MED is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. PEBAX® 2533 SA 01 MED also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response. Upon request letters regarding USP Class VI testing can be provided. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (230°C/5.0 kg) | 6.00 | cm³/10min | ISO 1133 |
| Spiral Flow 1 | 28.0 | cm | Internal Method |
| Molding Shrinkage - Flow (23°C) | 1.5 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 33 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/5A/500 | ||
| Break | 13.0 | MPa | |
| Break, -35°C | 23.6 | MPa | |
| Break, 85°C | 3.70 | MPa | |
| Tensile Strain | ISO 527-2/5A/500 | ||
| Break | 180 | % | |
| Break, -35°C | 73 | % | |
| Break, 85°C | 180 | % | |
| Flexural Modulus 2 | ISO 178 | ||
| -- | 240 | MPa | |
| 85°C | 69.0 | MPa |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | ISO 34-1 | ||
| -- | 76 | kN/m | |
| -35°C | 150 | kN/m | |
| 85°C | 47 | kN/m |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (-45°C) | 75 | kJ/m² | ISO 180 |
| Note Message | |
|---|---|
| 1 . | Condition A |
| 2 . | 3 points |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Flontech® FT-1-1L | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| ELASTOSIL® N 2034 | Wacker Chemie AG | Silicone | ELASTOSIL® N |
| KOPA® KN333G25CRBK | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| OmniCarb™ PC/ABS GR10 | OMNI Plastics, LLC | PC+ABS | OmniCarb™ |
| Sylvin 9925-68 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
