Order Products : sales@su-jiao.com
Epoxies, Ect. 20-3003
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6G2Uku_Epoxies-Ect-20-3003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
20-3003 is a low viscosity, potting, encapsulating, and adhesive system. Its low viscosity allows for good flow and wetting of substrates. 20-3003 has a convenient 2:1 (Resin:Catalyst) mix ratio by weight or volume. It will cure at room temperature or with mild heat. Ideal for meter mix and dispense equipment. Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 96.5 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 27 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | 96.0 | °C |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity (25°C) | 24500 | cP |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 1 | Black | ||
| -- 2 | Grey | ||
| -- 3 | White | ||
| Mix Ratio by Weight (PBW) | |||
| Part A | 100 | ||
| Part B | 50 | ||
| Mix Ratio by Volume (PBV) | |||
| Part A | 100 | ||
| Part B | 50 | ||
| Density (25°C) | 1.02 | g/cm³ | |
| Viscosity | |||
| 25°C 4 | 13 | Pa·s | |
| 25°C 5 | 30 | Pa·s | |
| Gel Time 6(25°C) | 1.5E+2 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Water Absorption 7 | 0.18 | % | |
| Shore Hardness (Shore D) | 84 | ||
| Tensile Strength | 58.6 | MPa | |
| Tensile Elongation at Break | 4.5 | % | |
| Compression Strength | 82.7 | MPa | |
| Relative Permittivity | 3.61 | ||
| Volume Resistivity | 1.1E+15 | ohms·cm | |
| Dissipation Factor | 0.021 |
| Note Message | |
|---|---|
| 1 . | Part A |
| 2 . | Mixed |
| 3 . | Part B |
| 4 . | Part A |
| 5 . | Part B |
| 6 . | 100 gram mass |
| 7 . | After 24 hours |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 600 FR AB | RTP Company | ABS | RTP |
| THERMOLAST® K TC2GPZ (Series: GP/FG) | KRAIBURG TPE | TPE | THERMOLAST® K |
| ULTEM™ 2310R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| APEX® 3080 | Teknor Apex Company | PVC, Flexible | APEX® |
| IDI STC 1023 | IDI Composites International | Polyester, TS | IDI STC |
