Order Products : sales@su-jiao.com
SABIC® PPcompound 7250U Provisional
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6EWeRF_SABIC-PPcompound-7250U-Provisional.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 7250U is a development grade, elastomer-modified mineral filled Polypropylene for automotive exterior applications. This material has been designed to combine a good performance profile with good processing. The grade is UV stabilized and suited for unpainted exterior applications. SABIC® PPcompound 7250U is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 14 | g/10 min | ISO 1133 |
| Molding Shrinkage (24 hr) | 0.90 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/5/50 | ||
| Yield, 3.20mm, injection molding | 15.0 | MPa | ISO 527-2/5/50 |
| Fracture, 3.20mm, injection molding | 11.0 | MPa | ISO 527-2/5/50 |
| Tensile Strain (Break, 3.20 mm, Injection Molded) | > 50 | % | ISO 527-2/5/50 |
| Flexural Modulus 1(3.20 mm, Injection Molded) | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180/4A | ||
| -20°C, injection molding | 10 | kJ/m² | ISO 180/4A |
| 0°C, injection molding | 20 | kJ/m² | ISO 180/4A |
| 23°C, injection molding | No Break | ISO 180/4A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | ASTM D696 | ||
| -30 to 30°C | 6.0E-5 | cm/cm/°C | ASTM D696 |
| 23 to 80°C | 1.0E-4 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | Method I (three-point load), 50mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zytel® FG42A NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| VALOX™ 357 resin | SABIC Innovative Plastics | PC+PBT | VALOX™ |
| Alathon® XL5906WC | LyondellBasell Industries | HDPE, HMW | Alathon® |
| Delrin® 900P BK602 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| ENSOFT SD-151-38D | ENPLAST, a Ravago Group Company | TPE | ENSOFT |
