Order Products : sales@su-jiao.com

NuSil MED-6342

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6EK2RC_NuSil-MED-6342.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil's restricted tacky gels can be used as temporary adhesives. Comments: LOW PENETRATION, HIGH TACK GEL

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil's restricted tacky gels can be used as temporary adhesives.

Comments: LOW PENETRATION, HIGH TACK GEL

General Information
Features	Biocompatible Breathable Low Viscosity
Uses	Adhesives Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Forms	Gel
Processing Method	Encapsulating

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Penetration Depth ¹	1.25	mm

Uncured Properties	Nominal Value	Unit
Viscosity	8.0	Pa·s
Curing Time (135°C)	0.75	hr
Pot Life (25°C)	600	min

Note Message
1 .	Shaft Weight/Foot Diameter/Time : 19.5g/6.35mm/5s

Resin Grade	Manufacturer	Category	Trademark
ULTEM™ SILTEM-STM1500 resin	SABIC Innovative Plastics Europe	PEI	ULTEM™
CEPLA CW-450	CEPLA Co., LTD	PP, Unspecified	CEPLA
Dryflex® 602400S	ELASTO	SEBS	Dryflex®
CP PRYME® ABS A100-36	Chase Plastics Services Inc.	ABS	CP PRYME® ABS
Moplen EP640T	PolyMirae	PP Impact Copolymer	Moplen