Order Products : sales@su-jiao.com
Andur 1-75 DP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6DZDO5_Andur-1-75-DP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 1-75 DP is a polyether based liquid isocyanate-terminated prepolymer. An elastomer with a hardness of 73-77 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'- methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, and by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 38.6 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 51.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 260 | % | ASTM D412 |
| Bayshore Resilience | 58 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 2.5 - 3.0 | min | |
| Demold Time (100°C) | 10 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 73 to 77Die C Tear, ASTM D1004: 860 pliAverage Split Tear, ASTM D1938: 280 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 1-75 DP: 150-180°F Curene 442: 220-235°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| QR Resin QR-4100-GF30 | QTR, Inc. | PPE+PS | QR Resin |
| SCANAMID 66 A32^E Q30 | Polykemi AB | Nylon 66 | SCANAMID 66 |
| ALCUDIA® HDPE 5803 | REPSOL | HDPE | ALCUDIA® HDPE |
| LEXAN™ ML2910 resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
| SABIC® HDPE M453G | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
