Order Products : sales@su-jiao.com
FRAGOM PR/410 SI
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6C4hgH_FRAGOM-PR-410-SI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM is the trade-mark of our flame retardant halogen free polyolefine thermoplastic compounds. FRAGOM PR/410 SI is a flame retardant polyolefine thermoplastic compound having high temperature index and good oxygen index, suitable for cable sheathing and insulation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 13.5 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 180 | % | ISO 527-2 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (110°C, 168 hr) | 5.0 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (110°C, 168 hr) | -19 | % | IEC 60811 |
| Change in Tensile Stress (70°C, 4 hr, in SAE 20 Oil) | 0.0 | % | ISO 1817 |
| Change in Tensile Strain at Break (70°C, 4 hr, in SAE 20 Oil) | -4.0 | % | ISO 1817 |
| Thermal | Nominal Value | Test Method | |
|---|---|---|---|
| Hot Pressure Test - Penetration 1(90°C) | 40.0 | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Corrosive Gas in Smoke - pH | > 4.50 | IEC 60754-2 | |
| Halogen Content | 0 | % | IEC 60754-1 |
| Temperature Index (Burning) 2 | 280 | °C | NES 715 |
| Oxygen Index | 36 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 110 | °C | |
| Cylinder Zone 2 Temp. | 130 | °C | |
| Cylinder Zone 3 Temp. | 155 | °C | |
| Cylinder Zone 4 Temp. | 160 | °C | |
| Cylinder Zone 5 Temp. | 170 | °C | |
| Die Temperature | 175 | °C |
| Note Message | |
|---|---|
| 1 . | 4 hr, K=0.6 |
| 2 . | 21% 02 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 202 Z | RTP Company | Nylon 66 | RTP |
| RTP 202D MS 5 | RTP Company | Nylon 612 | RTP |
| RTP 1106 HS | RTP Company | PET | RTP |
| BUP 624 | Bonyan Kala Chemie Company | Polyester, TS | BUP |
| Impet® 830R | Celanese Corporation | PET | Impet® |
