Order Products : sales@su-jiao.com
OP - PC/PEI 901
| Category: | PEI+PC , Polyether Imide + PC |
| Manufacturer: | Oxford Polymers |
| Trademark: | OP - PC/PEI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6Bcgx4_OP---PC-PEI-901.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
OP - PC/PEI 901 is a Polyether Imide + PC (PEI+PC) material. It is available in North America for injection molding. Important attributes of OP - PC/PEI 901 are:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 100 | MPa | |
| Break | 100 | MPa | |
| Flexural Modulus | 3280 | MPa | ASTM D790 |
| Flexural Strength | 145 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 75 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 185 | °C | |
| 1.8 MPa, Unannealed | 177 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | V-0 | ||
| 3.18 mm | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 to 121 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Drying Time, Maximum | 8.0 | hr | |
| Rear Temperature | 316 to 338 | °C | |
| Middle Temperature | 321 to 343 | °C | |
| Front Temperature | 327 to 349 | °C | |
| Processing (Melt) Temp | 316 to 343 | °C | |
| Mold Temperature | 93.3 to 149 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® SP-12256 | Teknor Apex Company | TPE | Monprene® |
| AKROMID® A3 1 FR black (3051) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Arak HDPE EX4 | Shazand (Arak) Petrochemical Corporation | HDPE | Arak HDPE |
| Elastollan® R 3001 | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| Lumiloy® GN1106FJ | LG Chem Ltd. | PPE | Lumiloy® |
