Order Products : sales@su-jiao.com
Nymax™ 600 A Natural
| Category: | Nylon 6 Alloy , Polyamide 6 Alloy |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Nymax™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 69gGEc_Nymax-600-A-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nylon 6 Nymax®600 blend series products are "salt and pepper" pellet blends, including nylon resin, processing aids, performance modifiers and color masterbatches. According to different grades, these materials are dedicated to improving melt processing, component properties or surface morphology, and are economical substitutes for complete chemical products. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.2 | % | ASTM D955 |
| Water Absorption (24 hr, 3.18 mm) | 1.6 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 77.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 80 | % | ASTM D638 |
| Flexural Modulus | 2690 | MPa | ASTM D790 |
| Flexural Strength | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Injection Molded) | 64 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.18mm | 150 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 3.18mm | 60.0 | °C | ASTM D648 |
| Melting Temperature | 215 | °C | ASTM D789 |
| Additional Information |
|---|
| 模制试验条：模制时干燥 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Mold Temperature | 48.9 - 93.3 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| FARALLOY® PP-155 | O'Neil Color and Compounding | PP, Unspecified | FARALLOY® |
| Hanwha Total PP KL11SW | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| HiFill® PA6 GF/B20 A3 BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| LUBEMID B27 GF20 NATURAL | LUBEN PLAST srl | Nylon 6 | LUBEMID |
| OTECH ALLOY NT7000-70 - Profile | OTECH Corporation | TP, Unspecified | OTECH ALLOY |
