Order Products : sales@su-jiao.com
INEOS PP 3950
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 69Y4qI_INEOS-PP-3950.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grade 3950 typically has a 35 melt flow rate and is a low gloss, high impact polypropylene copolymer. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 34 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 23°C, 24 hr | 1.6 | % | |
| 23°C, 48 hr | 1.6 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 79 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | > 50 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1310 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C, 3.18 mm | 50 | J/m | |
| 23°C, 3.18 mm | 140 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 104 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot-wire Ignition (HWI) 1 | UL 746 | ||
| 1.50 mm | PLC 3 | ||
| 3.00 mm | PLC 3 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | 28 | mm/min | FMVSS 302 |
| Flame Rating | UL 94 | ||
| 1.50 mm, No Color | HB | ||
| 3.00 mm, No Color | HB |
| Note Message | |
|---|---|
| 1 . | No Color |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tisetilen® PE UNR FR | Tisan | PE, Unspecified | Tisetilen® |
| ALCOM® PC 740/4.12 UV GY1161-11LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Anjacom® 250-GF15 | Almaak International GmbH | Nylon 6 | Anjacom® |
| LONGLITE® PMC T365FA | CCP Group | Phenolic | LONGLITE® PMC |
| Magnobond 92-1 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
