Order Products : sales@su-jiao.com
CEFOR™ 1050P
| Category: | LLDPE , Linear Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | CEFOR™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 67ofG2_CEFOR-1050P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CEFOR 1050P is a Linear Low Density Polyethylene Resin 1-Butene copolymer, produced in the Solution process. This resin is designed to be used in cast extrusion to produce films for stretch and health & hygiene applications. Complies with:
Additive:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.916 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 24 | µm | |
| Film Puncture Resistance (24 µm) | 11.1 | J/cm³ | Internal method |
| secant modulus | ASTM D882 | ||
| 2% secant, MD : 24 µm | 194 | MPa | ASTM D882 |
| 2% secant, TD : 24 µm | 174 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 24 µm | 33.6 | MPa | ASTM D882 |
| TD : Yield, 24 µm | 18.1 | MPa | ASTM D882 |
| MD : Break, 24 µm | 6.00 | MPa | ASTM D882 |
| TD : Break, 24 µm | 5.20 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 24 µm | 560 | % | ASTM D882 |
| TD : Break, 24 µm | 870 | % | ASTM D882 |
| Dart Drop Impact (24 µm) | 50 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 24 µm | 52 | g | ASTM D1922 |
| TD : 24 µm | 260 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 23.9 µm) | 93 | ASTM D2457 | |
| Haze (23.9 µm) | 0.94 | % | ASTM D1003 |
| Extrusion instructions |
|---|
| Processing Conditions for cast film analyzed: Die gap: 31.5 mil (0.8 mm) Melt Temperature: 455°F (235°C) Chill Roll Temperature: 64.4°F (18°C) Haul Off Speed: 15 m/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ACCUCOMP™ ABS881L | ACLO Compounders Inc. | ABS | ACCUCOMP™ |
| ALTECH® PA66 A 2060/100 GF60 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Hanwha Total PE E153F | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | EVA | Hanwha Total PE |
| Plaslube® PC / ABS EP | Techmer Engineered Solutions | PC+ABS | Plaslube® |
| TECHNYL® C 216 V30 BLACK 21N | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
