Grilamid® XE 3915

Category: Nylon 12 , Polyamide 12
Manufacturer: EMS-GRIVORY
Trademark: Grilamid®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 67h8TL_Grilamid-XE-3915.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Grilamid® XE 3915 is a Polyamide 12 (Nylon 12) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.

Important attributes of Grilamid® XE 3915 are:
  • Flame Rated
  • RoHS Compliant

Typical applications include:
  • Automotive
  • Electrical/Electronic Applications
  • Appliances
  • Consumer Goods
  • Engineering/Industrial Parts
General Information
Uses
  • Appliance Components
  • Automotive Applications
  • Automotive Exterior Parts
  • Connectors
  • Consumer Applications
  • Electrical/Electronic Applications
  • Engineering Parts
  • Household Goods
  • Hydraulic Applications
  • Industrial Applications
  • Medical Devices
  • Power/Other Tools
  • Sporting Goods
RoHS Compliance
  • RoHS Compliant
Forms
  • Granules
Processing Method
  • Injection Molding
PhysicalDryConditionedUnitTest Method
Density 1.47--g/cm³ISO 1183
Molding Shrinkage ISO 294-4
     Across Flow 0.50--%
     Flow 0.10--%
Water Absorption ISO 62
     Saturation, 23°C 0.80--%
     Equilibrium, 23°C, 50% RH 0.40--%
HardnessDryConditionedUnitTest Method
Shore Hardness (Shore D, 15 sec)--82ISO 868
Ball Indentation Hardness --155MPaISO 2039-1
MechanicalDryConditionedUnitTest Method
Tensile Modulus 1300011500MPaISO 527-2
Tensile Stress (Break)155135MPaISO 527-2
Tensile Strain (Break)6.06.0%ISO 527-2
ImpactDryConditionedUnitTest Method
Charpy Notched Impact Strength ISO 179/1eA
     -30°C 1615kJ/m²
     23°C 2120kJ/m²
Charpy Unnotched Impact Strength ISO 179/1eU
     -30°C 8580kJ/m²
     23°C 8580kJ/m²
ThermalDryConditionedUnitTest Method
Heat Deflection Temperature
     1.8 MPa, Unannealed 165--°CISO 75-2/A
     8.0 MPa, Unannealed 125--°CISO 75-2/C
Continuous Use Temperature Internal Method
     -- 190.0 to 120--°C
     -- 2150--°C
Melting Temperature 3178--°CISO 11357-3
CLTE ISO 11359-2
     Flow 1.5E-5--cm/cm/°C
     Transverse 1.2E-4--cm/cm/°C
ElectricalDryConditionedUnitTest Method
Surface Resistivity --1.0E+12ohmsIEC 60093
Volume Resistivity --1.0E+13ohms·cmIEC 60093
Electric Strength --35kV/mmIEC 60243-1
Comparative Tracking Index --600VIEC 60112
FlammabilityDryConditionedUnitTest Method
Flammability Classification (0.800 mm)HB--IEC 60695-11-10, -20
Additional InformationDryConditionedTest Method
ISO Type PA12, MHR, 18-120, GF50--ISO 1874
Note Message
1 .Long Term
2 .Short Term
3 .10°C/min
Resin Grade Manufacturer Category Trademark
TEKNIFLEX® Pouch MS4812 Tekni-Films, a div of Tekni-Plex Film, MG Paper/LDPE/Al Foil/Surlyn TEKNIFLEX® Pouch
ARCEL® 730B (2.00 pcf) NOVA Chemicals PS+PE ARCEL®
DOMAMID® 6G15ST DOMO Engineering Plastics SPA Nylon 6 DOMAMID®
KMI PP KM-503IB KMI Group, Inc. PP Impact Copolymer KMI PP
Pujie CM40L Zhanhua Pujie Chemical Technology Co.,Ltd CPE Pujie