Order Products : sales@su-jiao.com

MAJ'ECO GN080BS

Category:	Biodeg Polymers , Biodegradable Polymers
Manufacturer:	AD majoris
Trademark:	MAJ'ECO
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	67bXQD_MAJ-ECO-GN080BS.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

MAJ'ECO GN080BS is a biopolymer compound intended for injection mouldings.
Biobased Carbon content following ASTM D6866: 20%
Renewable resource content: 32%

MAJ'ECO GN080BS has been developed especially for demanding applications in various engineering sectors.

APPLICATIONS
Product such as:

Boxes

Containers

Racks

Technical components

General Information
Filler / Reinforcement	Carbon fiber reinforced material, 20% filler by weight
Features	Updatable resources Recyclable materials Compliance of Food Exposure
Uses	Container Bracket
Agency Ratings	FDA 21 CFR 176.170(c), Table 1 FDA 21 CFR 176.170(c), table 2 Europe No 10/2011
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.00	g/cm³	ASTM D792A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	54	g/10 min	ASTM D1238
Molding Shrinkage	1.0 - 1.6	%	Internal method

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	950	MPa	ASTM D638
Tensile Strength (Yield)	21.0	MPa	ASTM D638
Tensile Elongation (Break)	15	%	ASTM D638
Flexural Modulus	860	MPa	ASTM D790
Flexural Strength	25.0	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Dart Drop Impact	10.3	J	ASTM D5420

Additional Information	Nominal Value	Unit
Renewable Content	32	%

Injection	Nominal Value	Unit
Drying Temperature	70.0	°C
Drying Time	4.0	hr
Processing (Melt) Temp	170 - 200	°C
Mold Temperature	20.0 - 50.0	°C
Injection Rate	Moderate
Screw Speed	50 - 100	rpm

Injection instructions
Holding pressure: 50 to 70% of the injection pressure

Resin Grade	Manufacturer	Category	Trademark
RTP 4404	RTP Company	Nylon, Unspecified	RTP
MEGOLON™ IN200	AlphaGary	TP, Unspecified	MEGOLON™
Moplen EP243R	LyondellBasell Industries	PP Impact Copolymer	Moplen
ALCOM® PC 740/4 UV GY1408-07LD	ALBIS PLASTIC GmbH	PC	ALCOM® PC
KumhoSunny PC HCG2510FR	Shanghai KumhoSunny Plastics Co., Ltd.	PC	KumhoSunny PC