Order Products : sales@su-jiao.com
Vyncolit® BXE7665
| Category: | Phenolic , Phenolic |
| Manufacturer: | Vyncolit N.V. |
| Trademark: | Vyncolit® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 67Xmrl_Vyncolit-BXE7665.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vyncolit® BXE7665 is a glass fiber filled phenolic molding compound with high mechanical and good thermal properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.90 | g/cm³ | ISO 1183 |
| Apparent Density | 0.63 | g/cm³ | ISO 60 |
| Molding Shrinkage | 0.15 | % | ISO 2577 |
| Water Absorption (23°C, 24 hr) | 0.040 | % | ISO 62 |
| Post Shrinkage | 0.040 | % | ISO 2577 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strain at Break | 1.0 | % | ISO 178 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| ISO Type | >PF-(GF+MD)65< | ISO 11469 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 22000 | MPa | ISO 527-2 |
| Tensile Stress (Break, Injection Molded) | 101 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 0.56 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 21000 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 205 | MPa | ISO 178 |
| Compressive Stress | 293 | MPa | ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (Injection Molded) | 3.5 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (Injection Molded) | 12 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 1.8 MPa, Unannealed 1 | > 250 | °C | ISO 75-2/Af |
| 1.8 MPa, Unannealed | 195 | °C | ISO 75-2/Af |
| 8.0 MPa, Unannealed 2 | > 250 | °C | ISO 75-2/Cf |
| 8.0 MPa, Unannealed | 168 | °C | ISO 75-2/Cf |
| CLTE | ASTM E831 | ||
| Flow | 1.4E-5 | cm/cm/°C | |
| Transverse | 3.1E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.48 | W/m/K | ASTM E1461 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 4.3E+13 | ohms | IEC 60093 |
| Volume Resistivity | 8.1E+14 | ohms·cm | IEC 60093 |
| Electric Strength | 19 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 200 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | ||
| 3.00 mm | V-0 |
| Note Message | |
|---|---|
| 1 . | postcured up to 210°C |
| 2 . | postcured up to 210°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2099 X 126218 B | RTP Company | PLA | RTP |
| CELLIFF® 7000 | Microcell Composite Company | SBS | CELLIFF® |
| Magnobond 95 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| OpteSTAT™ MB PPS 7000 | Ovation Polymers Inc. | PPS | OpteSTAT™ |
| Sylvin 4200-50 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
