Order Products : sales@su-jiao.com
Desmopan® DP 1080A
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmopan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 63xuF3_Desmopan-DP-1080A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| injection molding grade; free from plasticizers; hard to soft systems; Technical parts |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1210 | kg/m³ | ISO 1183 1 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 3 sec) | 80 | ISO 868 2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 3 | DIN 53504 | ||
| Break, 23°C | 31.5 | MPa | |
| 10% Strain, 23°C | 1.30 | MPa | |
| 50% Strain, 23°C | 3.30 | MPa | |
| 100% Strain, 23°C | 4.10 | MPa | |
| 300% Strain, 23°C | 7.60 | MPa | |
| Tensile Strain 4(Break, 23°C) | 720 | % | DIN 53504 |
| Abrasion Resistance (23°C) | 35.0 | mm³ | ISO 4649-A |
| Tensile Storage Modulus | ISO 6721-1,-4 | ||
| -20°C | 171 | MPa | |
| 20°C | 34.0 | MPa | |
| 60°C | 24.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience | 44 | % | ISO 4662 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 5 | 56 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 22 | % | |
| 70°C, 24 hr | 39 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 80.0 | °C | |
| Processing (Melt) Temp | 185 to 200 | °C | |
| Mold Temperature | 20.0 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | 200 mm/min |
| 4 . | 200 mm/min |
| 5 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GN5152RF | Sincerity Australia Pty Ltd. | PC+ABS | Sindustris PC |
| Spartech Polycom SA5010 | Spartech Polycom | ABS | Spartech |
| Next Nylon 66 Prime Series PG40-01BK | Next Polymers Ltd. | Nylon 66 | Next Nylon 66 Prime Series |
| ELASTOSIL® R 502/70 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
| MAJORIS DFR290 | AD majoris | PP, Unspecified | MAJORIS |
