Order Products : sales@su-jiao.com
Dynaprene® SE0058A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Nantex Industry Co., Ltd. |
| Trademark: | Dynaprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 62tpKE_Dynaprene-SE0058A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dynaprene® SE0058A is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific for injection molding. |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.898 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 58 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow (300% Strain) | 2.76 | MPa | ASTM D412 |
| Tensile Strength - Across Flow (Yield) | 6.55 | MPa | ASTM D412 |
| Tensile Elongation - Across Flow (Break) | 670 | % | ASTM D412 |
| Tear Strength 1(23°C) | 29.8 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 14 | % | |
| 70°C, 22 hr | 35 | % |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MELOPAS® MF 2010 | RASCHIG GmbH | Mel Formald | MELOPAS® |
| Nylene® NX4795 | Custom Resins Group | Nylon 6 | Nylene® |
| FRAGOM PR/800 | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRAGOM |
| OmniLon™ PA6/6 IM8 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
| PEEK-OPTIMA® Image Contrast (High radiopacity) | Invibio Inc. | PEEK | PEEK-OPTIMA® |
