Order Products : sales@su-jiao.com
GLS Blends MS109
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | GLS Polymers Pvt. Ltd. |
| Trademark: | GLS Blends |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5xyHw0_GLS-Blends-MS109.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PC /ABS Precolor |
| General Information | |
|---|---|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 to 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | > 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 65.0 to 68.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 20 | % | ASTM D638 |
| Flexural Modulus | 3500 to 3800 | MPa | ASTM D790 |
| Flexural Strength | 106 to 114 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 550 to 600 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 110 to 114 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 95.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 234 to 265 | °C | |
| Mold Temperature | 100 to 110 | °C | |
| Injection Pressure | 68.0 to 102 | MPa |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melos™ FM 1224 | Melos GmbH | IIR | Melos™ |
| Axiall PVC UV-6680 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| EBAC+® SP1903 | Westlake Chemical Corporation | EBA | EBAC+® |
| Huafon HF-3390AX | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| INNOPOL® PP CS 1-1240 | Inno-Comp Ltd. | PP Homopolymer | INNOPOL® PP |
