Order Products : sales@su-jiao.com
FRAGOM PR/900 ELAS
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5vtZtK_FRAGOM-PR-900-ELAS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM PR PR/900 ELAS is a flame retardant halogen free polyolefin thermoplastic compound. FRAGOM PR PR/900 ELAS is a flexible flame retardant polyolefin thermoplastic compound having high temperature index and good oxygen index, suitable for cable sheathing. Study to Crosslinking by radiations, to pass 30,000 cycles and Sadomaso test. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.53 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 41 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 9.00 | MPa | IEC 60811 |
| Tensile Strain (Break) | 200 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (120°C, 168 hr) | 5.0 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (120°C, 168 hr) | -11 | % | IEC 60811 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conductivity | < 8.00 | µS/mm | IEC 60754-2 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Corrosive Gas in Smoke - pH | > 4.50 | IEC 60754-2 | |
| Halogen Content | 0 | % | IEC 60754-1 |
| Temperature Index (Burning) 1 | 320 | °C | NES 715 |
| Oxygen Index | 35 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 70.0 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Cylinder Zone 1 Temp. | 120 | °C | |
| Cylinder Zone 2 Temp. | 135 | °C | |
| Cylinder Zone 3 Temp. | 145 | °C | |
| Cylinder Zone 4 Temp. | 160 | °C | |
| Cylinder Zone 5 Temp. | 165 | °C | |
| Die Temperature | 170 to 180 | °C |
| Note Message | |
|---|---|
| 1 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CP PRYME® Nylon 66 NN233HL-ES BK | Chase Plastics Services Inc. | Nylon 66 | CP PRYME® Nylon 66 |
| GAPEX® RPP43EU86BK | Ferro Corporation | PP Copolymer | GAPEX® |
| POLYCOMPO PE 3520L | POLYCOMPO Co.,Ltd. | LLDPE | POLYCOMPO PE |
| Sumiliteresin® PR-53364 | SBHPP | Phenolic | Sumiliteresin® |
| Edgetek™ AS-20GF/000 BLACK | PolyOne Corporation | ABS | Edgetek™ |
