Order Products : sales@su-jiao.com
Eltex® MED PH23T630
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | Eltex® MED |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5t0SwB_Eltex-MED-PH23T630.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Low Density Polyethylene for Healthcare applications Benefits & Features Eltex® MED PH23T630 is a LD-polyethylene for injection moulding having excellent flow properties allowing short cycle time or easy filling of long flow-paths. The moulded article is characterized by low degree of guilt-in stress & good flexibility Eltex® MED PH23T630 is produced according to good manufacturing practice and is additive-free. Applications Eltex® MED PH23T630 is recommended for injection moulding of:
Eltex® MED PH23T630 can be sterilized with Eto-treatment or with Gamma radiation up till 50 kGy |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 22 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.5 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 49 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 180 | MPa | ISO 527-2/1 |
| Tensile Strain (Break) | 130 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 160 | kJ/m² | ISO 8256/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 49.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 92.0 | °C | ISO 306/A50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 230 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ranger PBT PBT-201-G30 | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| NEXT SIGNATURE POMC HF-300 | NEXT Specialty Resins, Inc. | Acetal (POM) Copolymer | NEXT SIGNATURE |
| Lupol® TE5007B | LG Chem Ltd. | TPO | Lupol® |
| PermaStat® 1800 Nat/Clear | RTP Company | Acrylic (PMMA) | PermaStat® |
| SD POLYCA™ IM5101V | Sumika Styron Polycarbonate Limited | PC | SD POLYCA™ |
