Order Products : sales@su-jiao.com

ALKAMIX™ MB6005

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	ALKAMIX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5ryRog_ALKAMIX-MB6005.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALKAMIX MB6005 is a combined slip and antiblock masterbatch based on a linear low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 8 percent and antiblock additive at a concentration of 25 percent. ALKAMIX MB6005 can be added to linear low density polyethylene (LLDPE) during extrusion to reduce film blocking and coefficient of friction. The level required will vary according to desired properties and presence of any other additives, however the recommended addition level is between 1 and 2 percent. The maximum level of addition of MB6005 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 2.5 percent, when added to a polyethylene formulation free of any other additives.

Message

ALKAMIX MB6005 is a combined slip and antiblock masterbatch based on a linear low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 8 percent and antiblock additive at a concentration of 25 percent.

ALKAMIX MB6005 can be added to linear low density polyethylene (LLDPE) during extrusion to reduce film blocking and coefficient of friction. The level required will vary according to desired properties and presence of any other additives, however the recommended addition level is between 1 and 2 percent.

The maximum level of addition of MB6005 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 2.5 percent, when added to a polyethylene formulation free of any other additives.

General Information
Additive	Antiblock (25%) Slip (8%)
Features	Antiblocking Slip
Uses	Blending
Forms	Pellets

Resin Grade	Manufacturer	Category	Trademark
NEFTEKHIM PP 1522J	Nizhnekamskneftekhim Inc.	PP Homopolymer	NEFTEKHIM PP
Badamid® LB70 GF15	Bada AG	Nylon 6	Badamid®
Flontech® FT-CF10-6	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
Edgetek™ ET3300-8029 RS NC701	PolyOne Corporation	PBT	Edgetek™
HIPOL™ J400	Mitsui Chemicals, Inc.	PP Homopolymer	HIPOL™