Order Products : sales@su-jiao.com
EMOPLEN® A 1320 G25
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | EMAS Plastik San.Tic.AS. |
| Trademark: | EMOPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5rFGzg_EMOPLEN-A-1320-G25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polypropylene %25 glass fiber reinforced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.08 to 1.12 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 to 15 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.90 to 1.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 70 to 75 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4000 to 5500 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 60.0 to 85.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 8.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | > 20 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 125 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 110 | °C | ISO 306/B |
| Melting Temperature (DSC) | 160 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics SC-104 | Thermoset, Lord Chemical Products | Silicone | Thermoset Plastics |
| Alathon® L3810X03 | LyondellBasell Industries | MDPE | Alathon® |
| AVP™ RYY13CP | SABIC Innovative Plastics | Nylon 66 | AVP™ |
| FHR Polypropylene AP6112-HS | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |
| LUVOCOM® 90-8551-1 | Lehmann & Voss & Co. | HDPE | LUVOCOM® |
