Order Products : sales@su-jiao.com
Quadrant EPP PPSU 1000
| Category: | PPSU , Polyphenylsulfone |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5psTGA_Quadrant-EPP-PPSU-1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPSU 100 stock shapes are produced from RADEL® R resin. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.29 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr, 3.00 mm | 0.35 | % | |
| Saturation, 23°C | 1.2 | % | |
| Equilibrium, 23°C, 50% RH | 0.60 | % | |
| Water Absorption | ISO 62 | ||
| 23°C, 3.00 mm 1 | 0.72 | % | |
| 23°C, 3.00 mm 2 | 55.0 | mg | |
| 23°C, 3.00 mm 3 | 26.0 | mg |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale, 10.0 mm) | 80 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2500 | MPa | ISO 527-2/1B/1 |
| Tensile Stress (Yield) | 76.0 | MPa | ISO 527-2/1B/5 |
| Tensile Strain (Break) | 30 | % | ISO 527-2/1B/5 |
| Compressive Stress | ISO 604/1 | ||
| 2% Strain | 35.0 | MPa | |
| 1% Strain | 18.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 10 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 200 | °C | ISO 75-2/A |
| Continuous Use Temperature | |||
| -- 4 | 180 | °C | |
| -- 5 | 210 | °C | |
| Glass Transition Temperature | 220 | °C | |
| CLTE - Flow | |||
| 23 to 100°C | 5.5E-5 | cm/cm/°C | |
| 23 to 150°C | 5.5E-5 | cm/cm/°C | |
| > 150°C | 5.5E-5 | cm/cm/°C | |
| Thermal Conductivity (23°C) | 0.35 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+14 | ohms·cm | IEC 60093 |
| Relative Permittivity | IEC 60250 | ||
| 100 Hz | 3.40 | ||
| 1 MHz | 3.50 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz | 1.0E-3 | ||
| 1 MHz | 5.0E-3 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | ||
| 3.00 mm | V-0 | ||
| Oxygen Index | 44 | % | ISO 4589-2 |
| Note Message | |
|---|---|
| 1 . | 96 hrs |
| 2 . | Weight, 96 hrs |
| 3 . | Weight, 24 hrs |
| 4 . | 20000 hrs |
| 5 . | Short periods |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Yanshan PE 2200J | SINOPEC Beijing Yanshan Petrochemical | HDPE | Yanshan PE |
| Europrene® N 2875 GRN | Versalis S.p.A. | NBR | Europrene® |
| Lupox® TE5011 | LG Chem Ltd. | PC+PBT | Lupox® |
| PERCOM® DHG40 | A. Schulman Europe | PP Homopolymer | PERCOM® |
| Plenco 01586 (Injection) | Plastics Engineering Co. | Polyester, TS | Plenco |
