Order Products : sales@su-jiao.com
InnoPlus LL9640A
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | PTT Global Chemical Public Company Limited |
| Trademark: | InnoPlus |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5pdG0Z_InnoPlus-LL9640A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| InnoPlus LL9640A resin is a hexene co-polymer based linear low density polyethylene which is designed for rotational molding applications. This is non UV-stabilized pelletized rotational molding grade which provides an excellent impact strength and good end use performance with optimizing the balance between stiffness and environmental stress cracking resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.932 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 1.90 mm, 100% Igepal, Compression Molded, F50) | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 56 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 15.0 | MPa | |
| Break, Compression Molded | 25.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 1000 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Compression Molded) | 240 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 110 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Oven Temperature | 260 to 290 | °C |
| Note Message | |
|---|---|
| 1 . | Partial Break |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NaturePlast NPC 203 | NaturePlast | Biodeg Polymers | NaturePlast |
| ALCUDIA® LDPE PE-023 | REPSOL | LDPE | ALCUDIA® LDPE |
| Arak HDPE BL1 | Shazand (Arak) Petrochemical Corporation | HDPE | Arak HDPE |
| ISOLOSS® LS-2500 | E-A-R Specialty Composites | PUR, Unspecified | ISOLOSS® |
| LUVOCOM® 1106-8087/BL/EM | Lehmann & Voss & Co. | PEI | LUVOCOM® |
