Order Products : sales@su-jiao.com
SEQUEL® 1497 PUV NH533 BLK
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | SEQUEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5pFig2_SEQUEL1497PUVNH533BLK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sequel 1497 PUV NH533 BLK is a very high melt flow TPO with good stiffness and excellent cold temperature impact. It is typically used for easy flow and fast molding. It has low density that reduces part weight and improves paint adhesion and is formulated for fully painted exterior trim and fascia applications. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.940 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 33 | g/10 min |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength 1(Yield, 23°C) | 18.0 | MPa | |
| Flexural Modulus 2(23°C) | 1200 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30°C | 5.0 | kJ/m² | |
| 23°C | 42 | kJ/m² |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1099 X 52742 H | RTP Company | PBT | RTP |
| SOLPLAST TC 2000D | UTEKSOL d.o.o. | SBS | SOLPLAST TC |
| Nilac HI | Soredi S.p.a. | ABS | Nilac |
| Akulon® F136-C | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Plexiglas® Satinice df33 7H | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
