Order Products : sales@su-jiao.com
RTP 280.8D
| Category: | Nylon 612 , Polyamide 612 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5nquZ9_RTP-280-8D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18 mm, Injection Molded | 0.35 | % | |
| 6.35 mm, Injection Molded | 0.45 | % | |
| Water Absorption (23°C, 24 hr) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 6890 | MPa | ASTM D638 |
| Tensile Strength | 103 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 3.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 5510 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 172 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 43 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 240 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 216 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 213 | °C | |
| Thermal Conductivity | 0.32 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+10 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+6 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 252 to 279 | °C | |
| Middle Temperature | 252 to 279 | °C | |
| Front Temperature | 252 to 279 | °C | |
| Mold Temperature | 60.0 to 93.0 | °C | |
| Injection Pressure | 69.0 to 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNOGRAN® POM F27/30 BLK | Eurocompound Polymers | Acetal (POM) Homopolymer | TECHNOGRAN® |
| Sindustris PBT TE5001H | Sincerity Australia Pty Ltd. | PC+PBT | Sindustris PBT |
| Viton® VTR-8530 | DuPont Performance Elastomers | Fluorelastomer | Viton® |
| Plasmer 5055N/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| MARPOL® HDB 501 Powder | Marco Polo International, Inc. | HDPE | MARPOL® |
