Order Products : sales@su-jiao.com
Braskem PE SHE150
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5m5BDP_BraskemPESHE150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: SHE150 resin is a High Density Polyethylene, copolymer of butene-1. It has been specially designed for monofilament extrusion process and provides a good balance of processability, spinnability, knotting strength as well as a very low gels amount. It can also be blended with LLDPE to improve blown film stiffness. It contains processing aid and antioxidant additives. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Raschel; shading and protecting nets; ropes. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.948 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 62 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, molding | 28.0 | MPa | ASTM D638 |
| Fracture, molding | 40.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1280 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 76.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 1 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Biobased Content | > 94 | % | ASTM D6866 |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SRP3003FRF | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Sylvin 8670-65FU Clear 876 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Diablend 4500/V0 | DTR S.r.l. (Develop Thermoplastic Resins) | PC+ABS | Diablend |
| DJSilicone NE-G171 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| EOS PA 2201 | EOS GmbH | Nylon 12 | EOS |
