Order Products : sales@su-jiao.com
ICORENE® 2550 YELLOW 2538
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5lNBAB_ICORENE-2550-YELLOW-2538.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 2550 Yellow 2538 is a linear low density polyethylene powder specific developed for rotational moulding. This grade has been designed for applications requiring good processability, toughness and flexibility. This grade is suitable or use in many different applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.6 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 13.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 1000 | % | ASTM D638 |
| Flexural Modulus | 380 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 200 | J/cm | Internal Method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ARMAMID® PA NE 30-1E | Poly Plastic | Nylon 6 | ARMAMID® |
| FAINGUM 6510 | Fainplast Compounds S.r.l | PVC, Unspecified | FAINGUM |
| Glastherm® HT | Glastic Corporation | Polyester, TS | Glastherm® |
| InnoPlus HD8100MB | PTT Global Chemical Public Company Limited | HDPE | InnoPlus |
| Lushan M-1 | Guangzhou Lushan New Materials Co., Ltd | Polyolefin, Unspecified | Lushan |
