Order Products : sales@su-jiao.com
ESAN® GFR 20
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | EMAS Plastik San.Tic.AS. |
| Trademark: | ESAN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5iVYKe_ESAN-GFR-20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SAN %20 glass fiber reinforced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 to 1.20 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 4.0 to 20 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.20 to 0.30 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 70 to 80 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4000 to 6000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 20.0 to 40.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 2.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | > 4.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 95.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 100 | °C | ISO 306/B |
| Melting Temperature (DSC) | 210 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TF2CGT (Series: FC) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Anjacom® 250-H/GF60 | Almaak International GmbH | Nylon 6 | Anjacom® |
| FLEXITEQ™ F50D000 | Marplex Australia Pty. Ltd. | TPV | FLEXITEQ™ |
| EnCom M20 PBET | EnCom, Inc. | Polyester, TP | EnCom |
| LOTTMER SE-085AN | Lotte Chemical Corporation | SEBS | LOTTMER |
