Order Products : sales@su-jiao.com
Moldex® QS251D/QCM240
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Mitsubishi Chemical Corporation |
| Trademark: | Moldex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5dB1bP_Moldex-QS251D-QCM240.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moldex® QS251D/QCM240 is a Polyolefin material. It is available in Asia Pacific. Primary attribute of Moldex® QS251D/QCM240: Crosslinkable. Typical application of Moldex® QS251D/QCM240: Plumbing/Piping/Potable Water |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.945 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (120°C/5.0 kg) | 0.10 | g/10 min | ISO 1133 |
| Gel Content 1(120°C) | 69 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, 23°C | 23.1 | MPa | |
| Yield, 95°C | 8.90 | MPa | |
| Break, 23°C | 28.0 | MPa | |
| Break, 95°C | 14.3 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Break, 23°C | 430 | % | |
| Break, 95°C | 600 | % |
| Note Message | |
|---|---|
| 1 . | In Xylene, 20 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ranger PBT PBT-201-G15 202 | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| ARCEL® ULV (1.75 pcf) | NOVA Chemicals | PS+PE | ARCEL® |
| Gallonprene® GP410-8702 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| ELASTOSIL® 4100 | Wacker Chemie AG | Silicone | ELASTOSIL® |
| Plantic® GP100 | Plantic Technologies Limited | Biodeg Polymers | Plantic® |
