Order Products : sales@su-jiao.com
Estane® 58213 TPU
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5cQiiI_Estane-58213-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 58213 is a 75A aromatic Polyester-Based Thermoplastic Polyurethane (TPU). Features: Excellent blend partner for PVC and general adhesive and good physical properties. Uses: Flat die/cast film extrusion and hose jacketing, Calendaring/melt coating. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 72 - 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 6.40 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 6 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 2.80 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 4.10 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 37.9 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 68 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 53.0 | kN/m | ASTM D624 |
| Cracking | 18 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -30.0 | °C | DSC |
| Melting Temperature | 110 | °C | DSC |
| Kofler Melting Temperature | 100 | °C | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 54.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 166 | °C | |
| Cylinder Zone 2 Temp. | 171 | °C | |
| Cylinder Zone 3 Temp. | 176 | °C | |
| Cylinder Zone 4 Temp. | 182 | °C | |
| Adapter Temperature | 182 | °C | |
| Melt Temperature | 179 | °C | |
| Die Temperature | 182 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40/80 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ming Dih EPS LS3 | Ming Dih Group Corporation | PS (EPS) | Ming Dih EPS |
| SMOKEGUARD™ HP 700 NATURAL | AlphaGary | Fluoropolymer | SMOKEGUARD™ HP |
| Monprene® MP-1627-L3 | Teknor Apex Company | TPE | Monprene® |
| ArgoGraph® 46510 | Argotec LLC | TPU, Unspecified | ArgoGraph® |
| Clariant Nylon 6/6 PA-133 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
