Bynel® 41E766

Category: LLDPE , Linear Low Density Polyethylene
Manufacturer: DuPont Packaging & Industrial Polymers
Trademark: Bynel®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 5c3I9h_Bynel-41E766.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
BYNEL® Series 4100 series resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All BYNEL Series 4100 series resins are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins.

BYNEL 4100 series resins adhere to a variety of materials. They are most often used to adhere to EVOH, polyamide, PE and ethylene copolymers.
Series 4100 resins can be used in coextrusion processes including:
  • blown film
  • cast film/sheet
  • blow molding
  • melt and solid phase thermoforming
  • sheet and tubing
LLDPE resins are known for their temperature resistance, clarity and toughness.
These physical properties make the 4100 series resins work well in applications such as:
  • boil-in-bag structures
  • blow molded containers in which drop strength is important
  • bag-in-box films
  • film where LLDPE is the heat seal layer.
General Information
Features
  • Good adhesion
Uses
  • Films
  • Blow molding applications
  • Pipe fittings
  • cast film
  • Sheet
  • Container
  • Adhesive
Agency Ratings
  • FDA 21 CFR 175.105
Forms
  • Particle
Processing Method
  • Solid Phase Press. Form. Thermoforming
  • Blow molding
  • Co-extrusion molding
  • Extrusion
  • Thermoforming
PhysicalNominal ValueUnitTest Method
Specific Gravity 0.910g/cm³ASTM D792, ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)2.2g/10 minASTM D1238, ISO 1133
ThermalNominal ValueUnitTest Method
Vicat Softening Temperature 91.0°CASTM D1525, ISO 306
Peak Melting Temperature 121°CASTM D3418, ISO 3146
Freezing Point 196°CASTM D3418
ExtrusionNominal ValueUnit
Cylinder Zone 1 Temp. 160°C
Cylinder Zone 2 Temp. 185°C
Cylinder Zone 3 Temp. 235°C
Cylinder Zone 4 Temp. 235°C
Cylinder Zone 5 Temp. 235°C
Adapter Temperature 235°C
Melt Temperature < 260°C
Die Temperature 235°C
Extrusion instructions
Processing conditions shown are for coextrusion with EVOH.Processing conditions for coextrusion with nylon:Zone 1: 160°CZone 2: 185°CZone 3: 235°CZone 4: 260°CZone 5: 260°CAdapter: 260°CDie: 260°C
Resin Grade Manufacturer Category Trademark
Vital-Line SHM4202 Teknor Apex Asia Pacific PTE. LTD. PVC, Flexible Vital-Line
NEXT REGRIND PA6 8202-300RG NEXT Specialty Resins, Inc. Nylon 6 NEXT REGRIND
Bergadur™ PBT-GL30 BK007 PolyOne Corporation PBT Bergadur™
BMC 350 Bulk Molding Compounds, Inc. Polyester, TS BMC
Forprene® 6NM901A35 SO.F.TER. SPA TPV Forprene®